What Is eVent® Fabric?
The science behind better breathability, and why it matters even more in insulated snow gear.
eVent® is a waterproof, breathable membrane with millions of microscopic pores. Its Direct Venting™ technology lets sweat escape while keeping snow, rain and wind out, so you stay drier when you're working hard. Nexarina outerwear uses eVent® rated 25,000mm waterproof and 15,000g breathable.
Waterproof doesn't always mean comfortable
When you're skiing or snowboarding, your body produces heat and moisture. If that moisture can't escape, it builds up inside your gear and leaves your layers damp, even when no snow has gotten in.
That's why breathability matters just as much as waterproofing. Your outerwear needs to keep the weather out and let your sweat out at the same time.
How does Direct Venting™ technology work?
Those microscopic pores are the trick. Each one is too small for snow or rain to get in, but big enough for sweat to get out.
"It instantly vents moisture vapor (sweat) while providing full waterproof protection." eVent® Fabrics
The science behind the breathability
Some waterproof membranes use a continuous polyurethane (PU) layer that moisture has to slowly diffuse through.
eVent® Direct Venting™ membranes don't coat over their pores, so they stay air-permeable.
Why does that matter? Sweat has a more direct way out, so you stay drier and more comfortable while you're active.
eVent® vs. GORE-TEX®: what's the difference?
Both keep water out and let moisture escape. The difference is how each membrane handles that moisture, and what that means for care.
eVent®
An air-permeable membrane with open microscopic pores.
Vapour moves directly through the membrane, with no continuous PU layer over the pores.
High-output days: hiking for laps, riding hard, running warm and spring riding.
Without a PU layer, body oils and sunscreen reach the membrane, so it needs washing more often to keep breathing well.
GORE-TEX®
Several membrane types, including traditional ePTFE and newer ePE.
Some constructions use a PU component that moisture vapour diffuses through.
A wide range of uses, from everyday rain jackets to expedition shells, depending on the fabric.
Where a PU layer is used, it protects the membrane from oils, so it can need less frequent washing.
Is eVent® more breathable?
It can be. Its air-permeable structure gives it an edge over some PU-coated membranes. But not every GORE-TEX® fabric is built the same way, so the real difference depends on the specific fabric.
Is eVent® waterproof? What the ratings mean
Yes, it's fully waterproof. But how waterproof and breathable your gear is depends on the specific eVent® fabric and how it's built, so always check the ratings. Here are ours, and what they mean on the hill.
How much water pressure the fabric holds back. We recommend 20,000mm or higher for snow, so you stay dry sitting on a wet chair or riding in spring slush.
How many grams of sweat vapour pass through a square metre of fabric in 24 hours. 10,000g and up is what most riders should look for.
Want to decode the rest of the tag? See what outerwear specs mean.
Why breathability matters even more in insulated gear
Insulation keeps you warm by trapping heat. But if your sweat gets trapped too, your base layers get damp, and damp layers get cold fast once you stop moving.
eVent® lets that moisture out before it builds up, so your insulation stays dry and keeps doing its job. Add vents you can open with gloves on, and you can wear the same kit all season.
I ride in my Nexarina gear all season, from -35 mornings at the hill to sunny spring laps in April. With the vents open, I don't overheat.

How to care for eVent®
eVent® breathes best when it's clean. Four steps keep it waterproof and breathable for years.
-
1
Wash it more often
Body oils, sunscreen and dirt can clog the pores. Wash it whenever it looks or feels dirty.
-
2
Use a technical wash
Regular detergents can leave residue. Follow the care label for wash and dry settings.
-
3
Skip the softener
Fabric softener coats the membrane and stops it from breathing.
-
4
Refresh the DWR
If water stops beading on the outside, reapply a DWR treatment. Knees and seats go first.
Why Nexarina chose eVent®
Real mountain performance, without compromising on fit. Every piece is tested through Alberta winters.
- Avani Snow PantEasy on and off
- Everette BibMore coverage, no snow down your back
- Indy JacketPairs with either
Not sure on your size or length? Exchanges are free.
eVent® FAQ
What riders ask me most about eVent®.
Is eVent® waterproof?
Yes, fully waterproof. Our eVent® is rated 25,000mm, above the 20,000mm we recommend for snow sports.
Is eVent® better than GORE-TEX®?
Neither is better for everything. eVent® Direct Venting™ is known for breathability when you're working hard, while GORE-TEX® constructions with a PU layer can need less frequent washing. If you work up a sweat on the hill, eVent® breathability is a big advantage.
Does eVent® need to get wet to breathe?
No. Direct Venting™ lets sweat vapour out as soon as you start working hard, without waiting for moisture to build up inside your gear first.
Is eVent® warm?
eVent® itself isn't insulation. It's a membrane that blocks wind, snow and rain. The warmth comes from the insulation inside. Nexarina pairs eVent® with PrimaLoft®, which stays warm even when it gets damp.
How do I wash an eVent® jacket or snow pants?
Wash them more often than other gear, use a technical wash, skip fabric softener and refresh the DWR when water stops beading. The 4 care steps above cover it.
Is eVent® good for skiing and snowboarding?
Yes, especially for big days, sweaty hikes and spring riding, when breathability matters most.
Want the full technical details? Visit eVent® Fabrics.
Find the right outerwear for you
For every woman who ever had to make it work, this is for you.
Mikayla, Founder of Nexarina
